Products

The GS coupling places one stainless-steel diaphragm between two aluminum clamping hubs. This compact arrangement is intended for short motor-to-screw connections where shaft response is more

An open-sided mounting frame offered in separate DB stepper-motor and DS servo-motor patterns. Its two end faces reserve a protected space for the shaft coupling while allowing tools to enter from

The SHF holds the end of a round guide shaft against a vertical machine plate. Two flange holes secure the support to the plate, while a separate split-bore clamp grips the shaft.

EK and EF are installed at opposite ends of a ball screw, but they do not perform the same job. The EK unit establishes the screw’s axial reference, while the EF unit supports the far end without

KR and KRV cam followers are offered in paired sizes with the same principal mounting dimensions. The difference is inside the roller: KR uses caged needle rollers, while KRV uses a full-complement

The SA rod end screws into the end of a linkage through its external threaded shank. A bolt or pin passes through the spherical inner ring, allowing the connected parts to change angle without

The SCE16VUU is a closed bearing block for a 16 mm round shaft. Its shortened aluminum housing is intended for mounting plates where the available space along the shaft is limited.

A self-contained linear bearing with a cylindrical sleeve that passes through the mounting plate and a four-hole flange that fixes its position on the plate face.

LM-LUU and LME-LUU are extended cylindrical bearing sleeves for round-shaft guidance. Their internal bores may match, but the outside dimensions must be checked before preparing a replacement housing.

The SP series provides a hardened external bearing track around a central bore, reducing shaft mass while leaving an internal passage available for the machine design.

TBR-UU and TBR-LUU carriages provide a broad four-hole mounting platform around an open linear bearing, allowing the block to travel along a continuously supported round shaft.

The SBR16LUU is an 85 mm long open carriage containing two bearing sections for travel on a continuously supported 16 mm round rail.