Products

A recirculating-ball linear guide built around the THA-style block, sized from HGH15CA to HGH65HA. Used in machining centers, marble and stone cutting lines, grinding equipment, injection molding

SBR is a recirculating-ball bearing block that rides on a round shaft — steel balls cycle continuously between the block and the shaft, letting the load platform travel an unlimited stroke length

Made by rolling the screw spindle rather than grinding it, the SFI ball screw converts rotary motion into linear motion with noticeably less friction than a standard threaded screw — a common swap-in

A fixed-end support unit built around a 45° angular contact ball bearing sized for small-diameter ball screws, giving the shaft end the rigidity and rotational stability that a plain bushing can't

A solid linear shaft machined to your diameter, length, and finish — sized from 3mm up to 150mm, with drilling, threading, and hole-tapping done to spec rather than sold only in fixed stock

LM30UU is a cylindrical linear bearing for a 30 mm shaft. The “UU” version is fitted with seals at both ends, while the grooved outer shell allows the bearing to be retained inside a separately

The SI series connects a control rod to a pivot point while allowing the joint to change angle during movement. Its spherical inner ring handles limited oscillation and alignment variation rather

The SBR16 is a ready-matched linear guide consisting of a 16 mm round shaft, an aluminum support profile and an open-type recirculating-ball carriage. Continuous support beneath the shaft allows the

TBR25 combines a 25 mm round shaft, a continuous support base and a flanged bearing carriage. The carriage can be fastened from either mounting direction through its threaded-hole arrangement.

This hollow shaft provides a continuous ground running surface while removing material from the center. It is intended for assemblies that require a smooth bearing track but do not need the mass of a

GZS90K is a ball screw linear axis prepared for 400 W or 750 W motor configurations. Its separate coupling section connects the selected motor to the screw while keeping the drive components

The EGW combines a low mounting height with a carriage wider than its rail. This arrangement provides a broad connection area for compact tables, fixtures and stacked motion assemblies.