Products

A solid round shaft ground for use with matching linear bearings in guided machine movement. Diameter, material and end machining can be selected around the bearing and mounting arrangement.

The SK series is a compact pedestal used to hold a round rod above a machine base. A cut through the bore allows the grip to be released and retightened during assembly.

A single-axis HGWS60K positioning module with ball screw drive, integrated guidance and selectable strokes from 100 mm to 1200 mm.

A male-thread spherical rod end for linkage assemblies that require angular movement, oscillation and compensation for limited mounting misalignment.

A low-profile flanged linear guide for compact machines requiring stable four-direction load support and controlled linear travel.

SFU1204-3 uses a 12 mm screw shaft with a 4 mm lead. One shaft revolution moves the nut 4 mm, giving compact positioning axes a controlled feed without requiring a large-diameter screw.

The EGH series is designed for machines that need a profiled rail guide without adding unnecessary height to the moving structure. Four rail sizes are offered with either a short SA carriage or a

A solid round shaft provides the running surface for a linear bushing. This series is supplied in diameters from 3 mm to 150 mm, with standard GCr15 shafts hardened, ground and finished for linear

The SFE series pairs a high-lead screw shaft with a flanged nut and end-cap ball return. Each standard model travels one nominal shaft diameter per revolution, making the series suitable for

The SFU series combines a threaded shaft with a single flanged ball nut and an internal ball return path. Available sizes cover several shaft diameters and leads for machine positioning and automated

MGW is the wide-format miniature guide family shown on this page. It covers sizes 5 through 15, with C standard carriages and H longer carriages available to suit different mounting lengths.

The SBRS140K carries its mounting plate on four SBR20UU bearing blocks. Beneath the plate are two fully supported SBR20 shafts and a Φ20 C7 ball screw. The available working travel starts at 100 mm