Contact Us
- No.979, Qingchun Street, Liandu District, Lishui, Zhejiang, China
- admin@gyballscrew.com
- +0578-2950898
SFU1204 Compact Feed Screw Assembly
The SFU1204 Compact Feed Screw Assembly combines a 12 mm shaft and 4 mm lead with a single flanged nut. Its 35 mm nut length suits small feed mechanisms, while the flange provides a bolted connection to the moving carriage.
Description
A small shaft does not mean a 12 mm installation envelope
The flange is the widest part of this assembly. On the SFU1204-3 drawing, its outside diameter is 42 mm, with two opposite flats reducing the width across those faces to 30 mm. That distinction matters when the nut passes between closely spaced guide components or sits inside a shallow carriage.
The flats do not reduce the flange to a 30 mm circle. Clearance must follow its actual outline, including the curved portions and the mounting screw positions. This is where the dimensional drawing is more useful than selecting a screw by nominal diameter alone.
| SFU1204-3 feature | Catalogue specification |
|---|---|
| Shaft diameter / lead | 12 mm / 4 mm |
| Nut body diameter D | 22/24 mm - confirm supplied version |
| Flange outside diameter D2 | 42 mm |
| Mounting-hole pitch circle D3 | 32 mm |
| Flange mounting holes | 6 × Ø4.8 mm through |
| Width across flange flats H | 30 mm |
| Nut length L / flange thickness B | 35 mm / 8 mm |
| Lubrication connection G | M6 |
| Ball diameter / circulation n | 2.381 mm / 3 |
| Basic dynamic / static rating | 592 kgf / 1,129 kgf |
The six mounting holes follow the angular arrangement shown in the drawing. They should not be replaced on the mating plate by six equally spaced holes simply because the pitch-circle diameter matches. The flange thickness and screw access also need to be accommodated when detailing the attachment.
A housing around the SFU1204 Compact Feed Screw Assembly must leave access to the M6 lubrication connection. Recessing the nut completely into a close-fitting pocket can make that connection inaccessible after assembly. Include space for the selected fitting or a suitable lubrication passage in the housing design.
At a 4 mm lead, each revolution advances the nut by 4 mm. This defines the mechanical feed ratio, while the 2.381 mm balls and n3 circulation specification identify the listed nut configuration. The published load ratings describe that bearing arrangement; they are not a machine payload allowance and do not account for shaft buckling or support flexibility.
The product photograph shows machined shaft ends, but their dimensions are installation-specific. For the SFU1204 Compact Feed Screw Assembly, the bearing journals, retaining thread and coupling section should be dimensioned to suit the chosen supports. Keeping these end features separate from the nut mounting drawing makes both interfaces clear when preparing the finished screw.

Customer Product Customization Series
|
|
![]() |
![]() |
![]() |
Packing And Service
Wooden Case Packing + Carton Box Packing
![]() |
|
![]() |
![]() |
About Us
Guangyuan supplies SFU1204 assemblies in specified lengths with shaft ends machined to customer drawings. OEM/ODM enquiries can include the nut housing interface, support-bearing seats and motor coupling dimensions. The minimum order quantity is 10 pieces. Please identify the SFU1204-3 configuration and specify the required accuracy grade and axial clearance when requesting a quotation.




Hot Tags: SFU1204 Compact Feed Screw Assembly, ChinaSFU1204 Compact Feed Screw Assembly suppliers, manufacturers, factory, Ball Screw SFU1605, CNC Ball Screw Assembly, Industrial Ball Screw, Long Ball Screw, SFU1610 Ball Screw, The Ball Screw
You Might Also Like
























