Products

SCE16UU combines a recirculating linear ball bearing with a rectangular aluminium housing for travel along a 16 mm round shaft. The assembled block gives machine builders a flat mounting surface

The SA E series places a spherical bearing eye on an externally threaded shank. Its broad size range suits linkage connections that must carry load while following slow changes in angle caused by

SI T/K rod ends provide a threaded socket and a pivoting bearing eye in one component. The internal thread connects to a male-threaded linkage, while the spherical joint accommodates the changing

This SA series covers externally threaded spherical rod ends from SA5T/K through SA35T/K. The joint connects directly to a female-threaded linkage while allowing controlled angular displacement

The PHS series is an internally threaded spherical rod end for mechanical linkages exposed to radial loading, shock and limited angular misalignment. Its spherical sliding interface permits low-speed

The POS series combines an externally threaded rod body with a spherical plain bearing. It provides a compact connection point for linkages that must transmit load while accommodating limited angular

The FK series is a flange-mounted fixed-end support for ball screw assemblies. It locates the screw shaft axially and provides a rigid mounting interface where a compact round housing is preferable

Fixed and supported-end units are selected as a pair to locate a ball screw while supporting the opposite shaft end. This page covers BK and BF, EK and EF, and FK and FF combinations for different

The EK support unit establishes the fixed reference point of a ball screw assembly. Its compact housing contains an adjusted, preloaded bearing arrangement for supporting combined axial and radial

The FF series supports the non-locating end of a ball screw in an FK and FF mounting arrangement. Its compact flange housing is intended for end-face installation where a base-mounted support block

The EF series is the supporting-side unit used opposite an EK fixed-end block. It carries the free end of a small ball screw shaft while leaving axial location to the EK side.

The BK series locates the fixed end of a ball screw shaft. Its bearing arrangement supports rotation while controlling axial movement, making it the locating side of a standard BK and BF installation.