China Chrome Linear Shaft Manufacturers Factory Suppliers

With 2 of each end softened, it’s easier to machine a custom end for mounting. The rest of the shaft is case-hardened, which increases hardness and wear resistance on the surface of the shaft while

This solid linear shaft has an induction-hardened, ground and polished outside diameter. The finished surface is the running race for the balls and seals inside a round linear bearing.

A round motion rod supplied in lengths from 100 mm to 2950 mm, with a ground and polished outside surface specified to g6 tolerance.

A solid round shaft ground for use with matching linear bearings in guided machine movement. Diameter, material and end machining can be selected around the bearing and mounting arrangement.

A chrome-plated bearing-steel shaft supplied in multiple diameters and cut to the required length. It is intended mainly for structural support, rotating mechanisms, or customer-specified end

A solid round shaft with an induction-hardened, precision-ground and polished running surface for use with compatible linear bearings.

This solid steel shaft has a ground running surface finished with hard chrome plating. It is made for linear bearings that travel directly along a round shaft.

A smooth round shaft made for linear ball bearings, available in standard diameters or with machined ends to suit the installation.

GuangYuan linear rail shaft refers to the linear optical shaft whose surface has undergone high-frequency hardening treatment. Its hardness usually reaches about HRC60 and can be used with linear

The Precision Linear Shafts are widely used in automatic and rotating devices. Industrial automatic machines such as industrial robots, precision printers, automatic transcription machines, automatic

Shafts with chamfered edges have their edges ground to reduce damage to bearings, housings, and other components during installation. Please feel free to contact us at any time.

A shoulder near the end of the shaft allows for easy positioning of housings, shaft supports, and collars. Clip retaining rings into the grooves to separate and position collars, supports, and