China Linear Motion Ball Slide Manufacturers Factory Suppliers

Linear Motion Ball Slide is a mechanical device used to support and guide a moving part so that it can carry out reciprocating linear motion in a given direction. It is usually composed of a guide

SBR is a recirculating-ball bearing block that rides on a round shaft — steel balls cycle continuously between the block and the shaft, letting the load platform travel an unlimited stroke length

An open linear bearing block designed for use with a TBR20 supported round guide rail, providing smooth reciprocating motion along a 20 mm shaft.

TBR16 is a 16 mm round shaft fixed along an aluminium support rail. Its lower mounting height makes it useful where an SBR rail would sit too high.

A short housed linear ball bearing designed to run on a 16 mm round shaft where the available mounting length is limited.

A supported round-shaft rail supplied with metal shims for making small height and alignment corrections during installation.

A long-body linear ball bearing unit for guided travel on metric round shafts, available in standard and clearance-adjustable versions.

SBR 20 linear rail is assembled of Support Rail, LM Shaft, and Open type Linear Bushing Case. All components are standardized for providing interchangeability and less cost and designing time.

The supported rod design increases rigidity while maintaining the standard configuration of smooth rod set ups, this allows for heavier loads to be incorporated into your application.

SBR guide rail is a kind of rolling guide rail, which is made of rolling steel balls to move back and forth between the slide and the guide rail in infinite stroke.

TBR linear guide rail is a kind of rolling guide, which is reciprocated by the steel ball between the slide block and the guide rail, and the load platform can easily move linearly along the track

The features of TBR linear rails are High Precision, High Speed, Long Life, High Reliability, Low Noise, Reduce Friction and Good Quality.