China 25mm Linear Shaft Manufacturers Factory Suppliers

Combine these general purpose shafts with a linear bearing and shaft support to create a basic linear motion system.

A solid linear shaft machined to your diameter, length, and finish — sized from 3mm up to 150mm, with drilling, threading, and hole-tapping done to spec rather than sold only in fixed stock

This hollow shaft provides a continuous ground running surface while removing material from the center. It is intended for assemblies that require a smooth bearing track but do not need the mass of a

The SP series provides a hardened external bearing track around a central bore, reducing shaft mass while leaving an internal passage available for the machine design.

A solid round shaft ground for use with matching linear bearings in guided machine movement. Diameter, material and end machining can be selected around the bearing and mounting arrangement.

A 25 mm steel shaft for machines that use round linear bearings. Length and end machining can be matched to the way the shaft will be supported and installed.

A smooth, step-free hollow shaft used to support rotating components, transmit torque, or guide linear motion — chrome plated and ground to a tight surface finish for applications where friction and

A solid round shaft with an induction-hardened, precision-ground and polished running surface for use with compatible linear bearings.

An SP series hollow linear shaft with a customizable internal diameter and wall thickness for guided linear-motion assemblies.

GuangYuan linear rail shaft refers to the linear optical shaft whose surface has undergone high-frequency hardening treatment. Its hardness usually reaches about HRC60 and can be used with linear

The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and

With 2 of each end softened, it’s easier to machine a custom end for mounting. The rest of the shaft is case-hardened, which increases hardness and wear resistance on the surface of the shaft while