+86-578-2950898

Latest Products

  • HGH Series Linear Guide Rail
  • SBR Linear Bearing Block
  • SFI Rolled Thread Ball Screw
  • BF Series Ball Screw Support
  • Custom Machined Guide Shaft
  • LM30UU Dual-Seal Ball Bushing Cartridge

Contact Us

SFU2005 CNC Feed Ball Screw video

SFU2005 CNC Feed Ball Screw

SFU2005 CNC Feed Ball Screw advances a carriage by 5 mm per revolution through a single flanged nut. It suits feed mechanisms where controlled incremental movement matters, with a 20 mm nominal screw diameter and a 51 mm nut length for machine layout planning.

Description

Small commanded movements need more than a small lead

Consider a directly coupled 1.8° stepper motor: its 200 full steps per revolution divide the SFU2005's 5 mm lead into a theoretical 0.025 mm movement per full step. This calculation helps establish the control scale for a feed axis. It does not mean the assembled machine achieves 0.025 mm positioning accuracy, and adding microsteps does not remove mechanical clearance.

 

That distinction matters on a table that repeatedly approaches a feature from opposite directions. The SFU2005 CNC Feed Ball Screw model designation identifies diameter and lead, but does not by itself establish preload or reversal backlash. A buyer replacing a worn feed screw should specify the required axial clearance alongside the accuracy requirement, rather than relying on "2005" as a complete performance specification.

 

The published SFU2005-4 configuration lists 3.175 mm balls and a circulation arrangement of 1 × 4. Recirculating balls transfer axial force between the screw and nut raceways, then return through the circulation paths as motion continues. The "-4" configuration should therefore remain in the purchasing specification rather than being omitted from the model reference.

 

SFU2005-4 characteristic Published value
Nominal screw diameter 20 mm
Lead 5 mm
Ball diameter 3.175 mm
Ball circulation arrangement 1 × 4
Nut body diameter 36 mm
Flange dimension / thickness 58 / 10 mm
Nut length 51 mm
Dynamic load rating Ca 1,130 kgf
Static load rating Coa 2,380 kgf

 

The two load ratings answer different questions. The dynamic rating is used in fatigue-life assessment under operating load; the static rating relates to permanent deformation under heavy loading. Neither figure can be read directly as the allowable weight of a CNC table. Cutting thrust, acceleration and the duty cycle must be included in the load assessment.

 

For packaging the drive, the single nut occupies 51 mm along the screw. Its flange provides the attachment face to the moving member, while the 36 mm body diameter defines a separate clearance requirement. The M6 lubrication port also needs to remain accessible after the nut housing is fitted.

 

For CNC refurbishment, select the SFU2005 CNC Feed Ball Screw around the existing feed requirement, available nut space and acceptable reversal error. These details are more useful than a general request for a "high-precision screw."

45

About Us

Guangyuan supplies SFU assemblies with screw lengths and machined ends produced to customer drawings under OEM/ODM. Include bearing-seat dimensions, coupling details and the required accuracy and axial clearance in the enquiry. The minimum order quantity is 10 pieces.

 

product-1536-1024product-1536-1024product-1536-1024product-1536-1024product-1122-1402

Hot Tags: SFU2005 CNC Feed Ball Screw, ChinaSFU2005 CNC Feed Ball Screw suppliers, manufacturers, factory, Ball Screw Set, CNC Ball Screw Assembly, High Precision Ball Screw, Long Ball Screw, Precision Ball Screw Assemblies, Rotating Nut Ball Screw

Send Inquiry

(0/10)

clearall