Contact Us
- No.979, Qingchun Street, Liandu District, Lishui, Zhejiang, China
- admin@gyballscrew.com
- +0578-2950898
KR16 Stud Mount Cam Follower
The KR16 Stud Mount Cam Follower combines a 16 mm crowned roller with an integral M6 × 1 threaded stud. It mounts to a machine bracket and follows a cam or track, with provision for relubrication through the stud.
Description
A KR16 and a KR19 both measure 11 mm across the roller, so either may appear to fit between the same side plates. Their running diameters tell a different story. The radius increases from 8 mm on the KR16 to 9.5 mm on the KR19. With the stud centre held in the same position, the running surface nearest a flat track would sit 1.5 mm closer to it. That change can affect the initial gap or contact in a mechanism already set around a 16 mm roller. The mounting thread also changes from M6 × 1 to M8 × 1.25, so check the bracket before choosing a neighbouring size.
| Model | Roller OD D (mm) | Roller width C (mm) | Stud diameter D₁ (mm) | Stud thread G | Thread length G₁ (mm) | Overall length B₁ max (mm) |
|---|---|---|---|---|---|---|
| KR13 | 13 | 9 | 5 | M5 × 0.8 | 7 | 23 |
| KR16 | 16 | 11 | 6 | M6 × 1 | 8 | 28.2 |
| KR19 | 19 | 11 | 8 | M8 × 1.25 | 10 | 32.2 |
In the KR16 Stud Mount Cam Follower, the stud provides the inner raceway for the needle rollers. The outer ring rolls directly on the cam or track. Its crowned surface helps reduce edge contact when the roller and track are slightly out of square. If an old roller shows a narrow wear band at one edge, check how the bracket positions the stud relative to the track. Replacing the roller alone may leave the contact in the same place.
The mounting drawing also needs room for the fastening and lubrication arrangements. Guangyuan lists 8 mm of thread length and a maximum overall length of 28.2 mm for this size. Use both dimensions when checking the bracket, nut and any guard behind the stud. The available thread beyond the bracket depends on how the stud seats, so verify the resulting nut engagement in the assembled position.
For a KR16 Stud Mount Cam Follower fitted behind a fixed guard, confirm the grease entry on the supplied configuration before finalising the bracket drawing. The lubrication passage runs through the stud. Its mounting position determines whether the grease tool can reach the entry with the follower in place. If a guard covers that area, show the intended service opening on the drawing when requesting a quote.

About Us
Lishui Guangyuan Industry & Trade Co., Ltd. supplies KR series cam followers. For drawing or sample based OEM/ODM enquiries, send the roller envelope, stud mounting details and required lubrication arrangement for review. The minimum order quantity for standard KR16 cam followers is 20 pieces.





Hot Tags: KR16 Stud Mount Cam Follower, ChinaKR16 Stud Mount Cam Follower suppliers, manufacturers, factory
You Might Also Like
















