Two long wooden cases are open on the packing floor. The green wrapping makes it possible to see the parts inside: profiled linear guide rails in one case and long ball screw assemblies in the other. The mounting holes along the rails are still visible through the protective sleeves. Several other wooden cases, already closed and marked by hand, are stacked around them.
The guide rails correspond to the HGH Series Linear Guide Rail range in our catalogue. These guides use hardened GCr15 bearing steel rails with recirculating-ball blocks. The available range covers HGH15CA to HGH65HA, and rail lengths can be made to order. Different block styles, clearance classes and precision grades are available. The choice depends on the machine drawing and the working conditions rather than simply selecting the largest specification.
The screw assemblies are related to our SFU Internal Return Ball Screw range. This design uses a single flanged nut with an internal ball-return path. Listed shaft diameters range from 12 mm to 100 mm, with different lead options depending on size. Overall length and shaft-end machining can be prepared from customer drawings. The dimensions at both ends need particular attention when the screw is fitted to existing bearing supports and couplings.
Czechia has a long-established engineering and automotive manufacturing base. Its machinery industry includes manufacturers of machine tools, production equipment and automation systems. Linear guide rails and ball screws are used in CNC feed axes, positioning fixtures and equipment that transfers components between production stations. For local machine builders, having the correct rail length, mounting-hole arrangement and screw lead is important when replacing existing parts or building a new machine.
Before packing, the rails and screw assemblies are kept separately. Each component is covered with green protective material, and the long wooden cases provide space for the parts to lie straight. The exposed ends are protected as well.
The guide rails go into one long case and the ball screw assemblies into the other. We leave the green wrapping on the parts and secure them inside before fitting the lids. The cases are then prepared for the sea shipment to Czechia.






