At present, in the use of ball screw, I believe many people have encountered the situation that the nut needs to be disassembled due to external force. They are unfamiliar with the nut and it is easy to damage it in the process of disassembly. Therefore, it is very necessary to master the correct disassembly method.
To remove the ball screw nut, you need to prepare some tools, including wrenches, hammers, pliers, rags, etc. Remove the dirt on the surface before disassembly, and check whether the ball screw is damaged, so as to avoid more serious damage during disassembly. Remove the nut according to the correct steps.
1. Loosen the nut counterclockwise with a wrench, and be careful not to use too much force to avoid damaging the ball screw.
2. If the nut is very tight, you can tap the nut with a hammer or use pliers to lock the ball screw to screw the nut.
3. When the nut is loose, you can unscrew it by hand. If it still cannot be disassembled, you can tap the nut with a hammer, and be careful not to hit the ball screw body to avoid damage.
4. After removing the nut, it is necessary to clean the ball screw and nut with a rag.
Of course, when removing the nut, attention should be paid to keeping the ball screw level to avoid the nut getting stuck between the balls; When it is necessary to tap lightly with a hammer, a wooden stick should be used instead of a metal hammer to avoid damaging the ball screw or leaving a pit to affect the working effect of the nut; After disassembly, it is necessary to carefully check whether the ball screw and nut are damaged and carry out necessary maintenance.
Generally speaking, when we disassemble the nut, we must be careful and follow the correct disassembly steps, so as to avoid secondary damage to the nut.
Whatsapp/wechat:17769815516/ 18157863895
Email:admin@gyballscrew.com
gykristyliu@gmail.com
judith@gyballscrew.com
