Miniature linear guide are generally used on some small equipment. Although the size of miniature linear guide is very small, the accuracy is not low at all. Generally, they are specifically used on some mechanical pick-and-place arms for precise measurement and detection, and the effect is good.
Miniature linear guide belongs to precision transmission parts, and we should be careful when using it. Even if we use a high-performance miniature guideway, if it is not properly maintained, it is very likely that it will not achieve the expected performance, and even directly damage the equipment. Therefore, we must be careful when using miniature guide rails. The following are some matters needing attention about the use of miniature linear guide.
1. Keep the miniature linear guide clean. Even dust invisible to the naked eye enters the guide rail and the slider, which will accelerate the wear of the guide rail and increase vibration and noise.
2. Installation tools should be suitable, special tools should be used, and things such as cloth and short fibers should not be used. When using, strong impact and direct impact on the guide rail with a heavy hammer are not allowed, and pressure is not allowed to be transmitted through the rollers.
3. To prevent the miniature linear guide from rusting, it is necessary to fully wash the sweat off your hands and apply high-quality mineral oil before you can directly take the guide rail with your hands. Be sure to use special protective gloves.
Normally, with proper maintenance and correct operation, the miniature linear guide can obtain a long service life, especially under light load, so as to better maintain the working efficiency.
Whatsapp/wechat:17769815516/ 18157863895
Email:admin@gyballscrew.com
gykristyliu@gmail.com
judith@gyballscrew.com
