The linear module is a high-precision transmission component. As we all know, if it is improperly installed, it will not show its advantages of high precision. Moreover, improper use will also wear the linear module. In view of the use safety of linear module, we must remember to strictly follow the relevant safety operation procedures, so as to give full play to the effectiveness of linear module and minimize the occurrence of common faults.
In the operation of the linear module, there are still many matters worthy of our attention. Today, we will have a brief understanding.
1. The purpose of the terminal equipment is to better prevent the driving force of the linear module from fading or being irrational, which will lead to risks. The terminal equipment will generate risks when clamping the object, and the size of the risks is related to the appearance, net weight, temperature and physical properties of the object. Before application, this element should be accurately measured and appropriate protective measures should be adopted.
2. When pressing the emergency stop switch and releasing the brake pedal, be sure to use the platform to cover the left and right shafts, because when removing the brake pedal of the linear module, the left and right shafts will drop.
3. When applying in the field where electromagnetic induction, electrostatic induction gas charging and discharging, and wireless network magnetic waves hinder, keep in mind the proper practical operation. Unscientific practical operation will lead to internal damage to the equipment.
4. The linear module is forbidden from being used in the natural environment of all combustible gases, because the heat generated during the whole operation of the equipment is likely to ignite combustible gases, powder, fire-making liquid, etc., and there is a possibility of explosion or fire accident.
5. If it is necessary to remove the motor in the linear module, be careful about the left and right shafts of the motor in the middle of removal to avoid the existence of explosion on the left and right shafts; When taking it out, use a linear module to cover the left and right shafts, and try not to use the human body to clamp a part of the left and right shafts between the left and right shafts and the stand. At the same time, be sure to disconnect the switch power supply of the control panel before disassembling.
Whatsapp/wechat:17769815516/ 18157863895
Email:admin@gyballscrew.com
gykristyliu@gmail.com
judith@gyballscrew.com
