Roller guide rail is widely used in heavy equipment, precision equipment, automatic production lines, aerospace and semiconductor equipment because of its high load, high precision, high stability and long life. Especially in the application of numerical control cutting machine, it is the most widely used.
For CNC cutting machine, the adjustment of roller guide rail is very important, which is one of the key factors for the accuracy and stability of CNC cutting machine. It directly affects the service life and cutting accuracy. In order to ensure the accuracy of the cutting process and the long-term operation of the machine, it is very important to scientifically adjust the guide rail.
1. Preparation before adjustment: Before adjustment, the guide rail must be thoroughly cleaned to remove dust, oil stains and other impurities on the surface, and the flatness and size should be checked on the guide rail with a ruler or a straight metal ruler to ensure the accuracy of adjustment.
2. Adjust the position of guide rails: Use a bubble level to adjust the horizontal and vertical levels of guide rails to ensure that they are within the allowable error range, and adjust the end of each guide rail, adjust the end of each guide rail to the distance between standard wires, and adjust it to the standard distance.
3. Adjust the parallelism of the guide rail: Use an angle measuring instrument to measure the parallelism of the guide rail. If the guide rail is not parallel, loosen the bolts on the guide rail and place parallel gaskets under the guide rail, and gradually adjust the bolts until the parallelism of the guide rail meets the requirements.
4. Check the adjustment results: After adjusting the guide rail, it is necessary to check whether the adjustment results meet the requirements, and check the dimensional accuracy and surface quality of the machined parts through trial cutting. If problems are found, it is necessary to further adjust the guide rail according to the trial cutting results.
The above is about the scientific adjustment method of roller guide rail of CNC cutting machine. When adjusting the guide rail, we should strictly follow the operation manual and correction process of the machine tool, and use professional measuring tools and equipment such as theodolite, vernier caliper and bubble level to avoid machine tool damage or personal injury caused by operation errors and ensure the accuracy and reliability of adjustment. Please contact us if you have other questions or purchasing needs.
Whatsapp/wechat:17769815516/17769816967
Email:admin@gyballscrew.com
gykristyliu@gmail.com
sales@gyballscrew.com
