How to avoid damage to the linear guide?
Mechanical components such as linear guides are precision parts. Therefore, a little carelessness during use will cause damage to the parts. During production operations, comparisons must be taken. Careful production attitude to avoid damage to the linear guide due to incorrect use.
1. Requirements for use
Linear guides also have relatively high requirements for the environment in which they are used. In our production environment, there is not only visible dust, but also some invisible dusts. Once these dusts fall into the linear guides, they will appear. Some undesirable use reactions, such as increasing the wear of the guide rail, increasing the vibration force of the machine, and increasing the noise, etc., will then cause other use problems.
2. Installation matters
For the installation of linear guide rails, it is also necessary to be careful. During installation, it is not allowed to press forcefully, nor to use heavy objects to install and knock the guide rails. Once improper installation occurs, technical measures must be taken. The behavior of the installation.
3. To avoid corrosion
To avoid such use conditions, first avoid directly using your hands to pick up such accessories, and the correct way is to wash your hands before use to remove stains and sweat, and then you can apply some on the linear guide. Mineral grease, and then other operations. Especially in the humid summer, we must do a good job of moisture-proof treatment.
Contact Us
E-mail: sales@gyballscrew.com Tel(WhatsApp): 17769816967
seller@gyballscrew.com 17769815516
saleChen@gyballscrew.com 15325179771
