How To Check And Adjust The Preloaded Bearing Washer Of The Screw Support Seat

It is very important to check and adjust the preloaded bearing washer for the screw support seat. The precision and stability of the washer directly affect the operation effect and equipment performance of the support seat. By regularly checking and adjusting the washer, it can be ensured to be in good working condition, improve the transmission efficiency and stability of the support seat, and reduce the risk of failure. So what do we do?

1. Prepare necessary tools, such as screwdrivers and wrenches, and measuring instruments, such as dial indicators and dial indicators, to detect the clearance and accuracy of bearings.

2. Remove the back cap supporting the bearing first to prepare for the subsequent measurement and adjustment.

3. Measure the clearance of the bearing with a measuring instrument to see if it is within the specified range. If the gap is too large or too small, it needs to be adjusted.

4. Adjust the bearing clearance by adding or reducing gaskets to make it conform to the specified range. The thickness of the gasket should be moderate. Too thin or too thick may affect the accuracy and stability of the support seat.

5. After the adjustment is completed, pre-load test shall be conducted to check whether the operation of the support seat is stable, without abnormal sound and whether the positioning accuracy meets the requirements.

6. After passing the test, reinstall the back cap supporting the bearing and ensure its fastening.

7. Regularly check and adjust the preloaded bearing washer of the screw support seat to ensure that it is always in good working condition.

Checking and adjusting the preloaded bearing washer is an important link to keep the screw support running efficiently and stably, which is helpful to improve the service life and production efficiency of the equipment and reduce the maintenance cost. Please contact us if you have other questions or purchase requirements.