First of all, before the sliding guide rail is sold, the guide rail manufacturer will coat the surface of the guide rail with a layer of antirust oil. However, due to the long process from packaging to customer use, antirust oil volatilizes. So when we put it into use, the antirust oil has evaporated. Therefore, anti-rust oil must be used when using the guide rail. At the same time, it is necessary to regularly check whether the antirust oil is volatile.
Secondly, if the guide rail is not put into use immediately after purchase, it needs to be placed on the shelf, but not on the ground at will. Placing it on the ground will accelerate the rust resistance of the guide rail, thus causing the guide rail to rust due to lack of protection and measures. At the same time, the environment where the guide rail is placed should be at room temperature, and there should be no corrosive products around it, otherwise the corrosion speed of the guide rail will be accelerated.
More importantly, you can't touch the guide rail directly with your hands, because people will sweat, and sweat stains can easily lead to rust on the guide rail. Therefore, when you are on the guide rail, you should put on gloves, finger covers or special tools. If you need to touch it directly, you need to clean the sweat and water stains on your hands.
Finally, the surface of the guide rail should be kept clean. When cleaning, according to the nature of the rust-proof surface and the conditions at that time, choose the appropriate cleaning method. Dry and clean the surface, dry it with filtered dry compressed air, or dry it with a dryer at 120 ~ 170 ° c, or dry it with clean gauze.
whatsapp/wechat:17769815516
Email:gykristyliu@gmail.com
admin@gyballscrew.com
