1. Before operating the loading and unloading, please pay attention to check whether there is water and oil in the electrical control box. If the electrical appliance is damp, do not turn it on, and check whether the power supply voltage is consistent and whether the front and rear safety door switches are normal.
2. Verify that the rotation direction of the motor is the same, and then turn on the power.
3. When the industrial robot needs to be dismantled, turn off the power supply of the injection machine, turn off the power supply of the manipulator, and turn off the pressure source of the manipulator.
4. Relieve the air pressure. Loosen the fixing screw of the fixed plate of the drawing cylinder, move the arm, and move the buffer seat to make it close to the arm.
5. Tighten the fixed plate of the drawing cylinder so that the arm cannot move. Lock the rotating safety screw so that the manipulator cannot rotate, etc.
Contact Us
E-mail: sales@gyballscrew.com Tel(WhatsApp): +86 17769816967
seller@gyballscrew.com +86 17769815516
saleChen@gyballscrew.com +86 15325179771
