The linear module is an indispensable part of automation equipment. In the process of automation equipment running, if the alarm fault of the linear module occurs, the automatic production line will often stop, resulting in a decrease in output, so it is very important to check the fault of the linear module!
1. Check the appearance for obvious wear, deformation or cracks. At the same time, check whether the installation base surface is smooth and clean, and there is no oil stain and impurity.
2. Check whether the coupling is loose or damaged and whether the driver works normally. If any abnormality is found, it needs to be replaced or repaired in time.
3. Check the slider, screw and other moving parts are working normally. If it is found to be stuck, loose or abnormal, it needs to be cleaned, lubricated or replaced.
4. Check whether the power supply is normal and the control system is stable. If the power supply or control system fails, the linear module may not work normally. It is necessary to check whether the power supply circuit and the control system circuit are in good condition and whether the parameters of the control system are set correctly.
5. Check whether the load borne by the linear module is within the allowable range and whether the operating parameters such as speed and acceleration are reasonable. If the load is too large or the operating parameters are set improperly, the linear module may fail. Need to be adjusted or repaired according to the actual situation.
If no problems are found in the above steps, further fault diagnosis and maintenance are needed. At this time, we can use professional testing equipment and tools to conduct comprehensive testing and testing of the linear module, find out the specific causes of the failure and repair it. You can contact us if you have other questions or purchase requirements.
Whatsapp/wechat:17769815516/17769816967
Email:admin@gyballscrew.com
gykristyliu@gmail.com
sales@gyballscrew.com
