With the development of the mechanical equipment industry, the application of linear guide rail in various the mechanical equipment has also been popularized, and the demand for linear guide rail in mechanical industry is increasing day by day. How to fix the linear guide rail in various scenes? The following are four fixing methods of linear guide rail.
1. Positioning bolt fixing method
Because of the limitation of installation space, the size of bolts used should not be too large.
2. Roller fixing method
The roller is pressed by the advance of the slope of the bolt head, so pay special attention to the position of the bolt head.
3. Push-pull fixation method
In this way, pressure is exerted by locking the push-pull block. Excessive locking force is likely to cause track bending or deformation of the outer shoulder, so special attention should be paid to the appropriateness of locking force during installation.
4. Pressure plate fixing method
In this way, the side of the rail and the slider should slightly protrude from the edge of the bed and workbench, and the pressure plate should be machined with escape grooves to prevent interference with the corners of the slide rail or slider during installation.
Whatsapp/wechat:17769815516/ 17769816967/ 18157863895
Email:admin@gyballscrew.com/ gykristyliu@gmail.com
gy15426591598@163.com/ judith@gyballscrew.com
